Accessories
 

Marking and coding

Marking material

The KLxxxx Bus Terminals can be individually labelled with standard contact signs. Signs with markings for the supply voltages are supplied together with the BKxxxx Bus Couplers, but can be changed if required. The marking material is not included in the Bus Terminal delivery. Other versions in other colours and with other texts are available on request or on the internet www.beckhoff.com/labelling.

Ordering information for contact labels, unprinted (100 pcs)
BZ1000 100 unprinted contact labels, white
BZ1002 100 unprinted contact labels, yellow
BZ1005 100 unprinted contact labels, red
BZ1006 100 unprinted contact labels, blue
BZ1007 100 unprinted contact labels, orange
BZ1008 100 unprinted contact labels, light green
BZ3000 180 equipment identification labels 12 x 7 mm for Bus Terminals with removable identification section, blank
Ordering information for contact labels, unprinted (100 pcs) Pict.
BZ1100 100 contact labels, printed with: 0 V, blue  
BZ1102 100 contact labels, printed with: –, blue  
BZ1104 100 contact labels, printed with: 24 V, red  
BZ1106 100 contact labels, printed with: +, red  
BZ1107 100 contact labels, printed with: +, white  
BZ1108 100 contact labels, printed with: PE, light green  
BZ1300 100 contact labels, ten of each printed with: 0…7, 20 unprinted, white  
BZ1400 100 contact labels, two of each printed with: 00 01…48 49, white
A
BZ3010 180 equipment identification labels 12 x 7 mm for Bus Terminals with removable identification section, printed (printed according to customer specification [in Excel file])  
A
BZ1400
 

Coding pins and sockets for KS and ES terminals

The coding pins and sockets for KS/ES terminals with pluggable wiring level enable coding between terminal and plug in order to prevent incorrect plug insertion.

Ordering information Set contains 100 sockets and 100 pins Pict.
ZS2010-0010 Coding pins and sockets for KS and ES terminals
A
A
ZS2010-0010
 

Slide-in label cover, transparent

The slide-in label covers BZ3200 enable clear labelling of the individual channels or text-based functional description of the EtherCAT Terminals. The labels are inserted in the designated slots. For connecting the individual channels the label cover can be tilted upwards.

Ordering information Pict.
BZ3200 insertable label cover, transparent, pluggable, 11.5 mm x 104.5 mm, packing unit = 50
A
A
BZ3200
 
Ordering information
BZ5100 push-in strips for labels, A4 sheet, 160 pieces, pre-punched, packing unit = 10