Digital combi
IE2403
 
IE2403 | 16-channel digital combi input/output 24 V DC
IE2403
I/O connection
I/O connection sockets (output)
I/O connection sockets (input)
Signal status display
Power supply
status display:
Box supply (US)
Auxiliary voltage (UP)
0 V
+24 V
1 | + 24 V DC Us
2 | + 24 V DC UP
3 | GND
4 | GND
1-wire  2-wire
1-wire  2-wire  3-wire
Power supply feed
Power supply down-
stream connection
 
IP-Link interface
+24 V
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 8
0 V
+24 V
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Output 8
0 V

IE2403 | 16-channel digital combi input/output 24 V DC

The digital IE2403 I/O module has sixteen channels with eight inputs and eight outputs. The device can therefore be flexibly adapted to the requirements of the application. The outputs handle load currents of up to 0.5 A, are short-circuit-proof and protected against inverse polarity. For the signal connection connectors with a spring-loaded system are used, optionally available with 1 or 3 pins. The module is supplied without connectors.

Technical data IE2403
Number of channels 16 channels (8 inputs and 8 outputs)
Input/output connections connector with spring-loaded system
Input filter 3 ms
“0“ signal voltage -3…+5 V
“1“ signal voltage 11…30 V, 6 mA input current (EN 61131-2, type 2)
Sensor supply from control voltage, max. 0.5 A total, short-circuit-proof
Load type ohmic, inductive, lamp load
Rated load voltage 24 V DC (-15 %/+20 %)
Max. output current max. 0.5 A on each channel, individually short-circuit safe
Short circuit current typ. 1.5 A
Auxiliary power current typ. 20 mA per channel
Current consumption from US (without sensor current) 25 mA
Power supply connection feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image 8 inputs + 8 outputs
Electrical isolation channels/control voltage: no, between the channels: no, control voltage/fieldbus: yes, via IP-Link
Operating/storage temperature 0…+55 °C/-25…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE
Accessories
ZS2001-0001 female header with spring connection as IP 20 plug-in connection level, for KM or EM modules, EP2316-0003, EPP2316-0003 and IE2403, 1 x 10-pin, without LED
ZS2001-0002 female header with spring connection as IP 20 plug-in connection level, for KM or EM modules, EP2316-0003, EPP2316-0003 and IE2403, 1 x 10-pin, with LED
ZS2001-0004 female header with spring connection as IP 20 plug-in connection level, for KM or EM modules, EP2316-0003, EPP2316-0003 and IE2403, 3 x 10-pin, with LED