HD EtherCAT Terminal, 16-channel potential distribution EL9188
Power contact
+24 V
Power contact 0 V
+24 V 
+24 V 
+24 V 
+24 V 
+24 V 
+24 V 
+24 V 
+24 V 
+24 V
+24 V
+24 V
+24 V
+24 V
+24 V
+24 V
+24 V
Top view 
Contact assembly 
extended temperature range
extended shock and vibration range

EL9188 | HD EtherCAT Terminal, 16-channel potential distribution

The EL9188 potential distribution terminal provides 16 terminal points with a potential and enables the voltage to be picked up without further bus terminal blocks or wiring.

The conductors can be connected without tools in the case of solid wires using a direct plug-in technique.

The HD EtherCAT Terminals (High Density) with increased packing density feature 16 connection points in the housing of a 12 mm terminal block.

Technical data EL9188
Technology potential distribution terminal
Number of outputs e.g.: 16 x 24 V contact
Current load ≤ 10 A
Power LED
Defect LED
Renewed infeed yes
Current consumption E-bus
Nominal voltage ≤ 60 V
Integrated fine-wire fuse
Electrical isolation 500 V (E-bus/field potential)
Diagnostics in the process image
Reported to E-bus
PE contact
Shield connection
Bit width in the process image 0
Electrical connection to DIN rail
Housing width in mm 12
Side by side mounting on
EtherCAT Terminals with
power contact
yes, left without PE
Side by side mounting on
EtherCAT Terminals without
power contact
yes
Special features direct plug-in technique
Conductor types solid wire, stranded wire and ferrule
Conductor connection solid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriver
Rated cross-section solid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm²
Weight approx. 60 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Approvals CE, UL, Ex