2-channel DC motor output stage 24 V DC, 1 A EL7332
Error B LED
Warning B
EnableB LED
Power LED
Error A LED 
Warning A 
EnableA LED 
Run LED 
Power contact
+24 V
Power contact 0 V
A1
B1
Power supply
Input 1
A2
B2
Input 2
Top view 
Contact assembly 
extended shock and vibration range

EL7332 | 2-channel DC motor output stage 24 V DC, 1 A

The EL7332 EtherCAT Terminal enables direct operation of two DC motors. It is galvanically isolated from the E-bus. The speed is preset by a 16 bit value from the automation unit. The output stage is protected against overload and short-circuit. The EtherCAT Terminal has two channels that indicate their signal state via light emitting diodes. The LEDs enable quick local diagnosis.

Technical data EL7332 | ES7332
Technology direct motor connection
Number of outputs 2
Number of channels 2 DC motors, 2 digital inputs
Rated load voltage 24 V DC (-15 %/+20 %)
Load type DC brush motors, inductive
Nominal voltage 24 V DC (-15 %/+20 %)
Max. output current 2 x 1 A
Performance increase Yes, through ZB8610 fan cartridge
output current with ZB8610 max. 3.0 A (overload- and short-circuit-proof)
PWM clock frequency 32 kHz with 180° phase shift each
Duty factor 0…100 % (voltage-controlled)
Electrical isolation 500 V (E-bus/field potential)
Current consumption power contacts typ. 40 mA + motor current
Bit width in the process image 2 x 16 bit status, 2 x 16 bit control, 2 x 16 bit output
Current consumption E-bus typ. 140 mA
Distributed clocks yes
Control resolution max. 10 bits current, 16 bits speed
Special features travel distance control
Weight approx. 50 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/see documentation
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL
Accessories  
EL9576 brake chopper terminal, 72 V, 155 µF
ZB8610 fan cartridge for EtherCAT and Bus Terminals
Related products  
EL7342 2-channel DC motor output stage 50 V DC, 3.5 A, EtherCAT Terminal, IP 20
EP7342 EtherCAT Box, industrial housing, 2-channel DC motor output stage 50 V DC, 3.5 A, IP 67
KL2532 2-channel DC motor output stage 24 V DC, 1 A, Bus Terminal, IP 20
KL2552 2-channel DC motor output stage 50 V DC, 5 A, Bus Terminal, IP 20