Servomotor terminal with OCT and STO, 50 V DC, 2.8 A (I<sub>rms</sub>) EL7201-9014
Power contact
+24 V
Power contact 0 V
Feedback + 
Digital Input 1 
Power contact +24 V 
Motor phase U 
Motor phase W 
Motor brake + 
Load voltage 50 V 
Load voltage 50 V 
Feedback –
Digital Input 2
Power
contact 0 V
Motor phase V
STO input
Motor brake
GND
Load voltage
GND
Load voltage
GND
Top view 
Contact assembly 

EL7201-9014 | Servomotor terminal with OCT and STO, 50 V DC, 2.8 A (Irms)

The EL7201-9014 servomotor EtherCAT Terminal with integrated absolute value interface offers high servo performance in a very compact design. The fast control technology, based on field-oriented current and PI speed control, supports fast and highly dynamic positioning tasks. The monitoring of numerous parameters, such as overvoltage and undervoltage, overcurrent, terminal temperature or motor load via the calculation of a I²T model, offers maximum operational reliability. EtherCAT, as a high-performance system communication, and CAN-over-EtherCAT (CoE), as the application layer, enable ideal interfacing with PC-based control technology. The latest power semiconductors guarantee minimum power loss and enable feedback into the DC-Link when braking. 16 LEDs indicate status, warning and error messages as well as possibly active limitations.

With the One Cable Technology (OCT) the encoder cable is omitted by transmitting the signals of the encoder digitally via the existing motor cable. The option to read the electronic identification plates of suitable motors from the AM81xx series enables a plug-and-play solution for maximum convenience during commissioning.

The EL7201-9014 enables the user to implement the safety function STO (Safe Torque Off) that corresponds to a Cat 3, PL d safety level according to DIN EN ISO 13849-1:2015.

Technical data EL7201-9014
Technology Compact Drive Technology
Load type permanent magnet-excited three-phase synchronous motor
Number of channels 1
Number of outputs 1 x servo motor, 1 x motor brake
Number of inputs 2 x end position, 1 feedback, 1 x STO
Connection method direct motor connection with OCT
Supply voltage electronics 24 V DC (via power contacts)
Supply voltage power 8…50 V DC (external)
Output current (rms) 2.8 A
Peak current (rms) max. 5.7 A for 1 s
Performance increase Yes, through ZB8610 fan cartridge
Output current with ZB8610 (rms) max. 4.5 A
Peak current with ZB8610 (rms) max. 9.0 A for 1 s
Frequency range 0…599 Hz
PWM clock frequency 16 kHz
Current controller frequency 32 kHz
Rated speed controller frequency 16 kHz
Output voltage motor brake 24 V DC
Output current motor brake max. 0.5 A
Current consumption power contacts typ. 100 mA + holding current motor brake
Current consumption E-bus 120 mA
Distributed clocks yes
Special features compact (only 12 mm wide), system-integrated, absolute feedback, One Cable Technology (OCT), plug-and-play, STO (Safe Torque Off)
Electrical isolation 500 V (E-bus/field potential)
Weight approx. 60 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/see documentation
Pluggable wiring
Approvals CE, UL, TÜV SÜD
Accessories  
EL1904 4-channel digital input terminal, TwinSAFE, 24 V DC
EL2904 4-channel digital output terminal, TwinSAFE, 24 V DC, 0.5 A
EL6910 TwinSAFE Logic
EL9576 brake chopper terminal, 72 V, 155 µF
ZB8610 fan cartridge for EtherCAT and Bus Terminals
AM811x Servomotor 0.20…0.52 Nm for servo I/Os (EL72xx, EP72xx)
AM812x Servomotor 0.50…0.80 Nm for servo I/Os (EL72xx, EP72xx)
AM813x Servomotor 1.35…2.35 Nm for servo I/Os (EL72xx, EP72xx)
ZK47x4-04xx, ZK4000-xxxx Supply cables for Compact Drive Technology
ZB85xx Shield busbar with mounting rail holder, shield busbar clamps
Related products  
EL7211-9014 servomotor EtherCAT Terminal for OCT, with STO input, 50 V DC, Irms = 4.5 A
EP7211-9034 EtherCAT Box, industrial housing, Servomotor modul with OCT and STO, 50 V DC, 4.5 A (Irms)