Ethernet switch port terminal EL6601
Status LEDs
Ethernet port 1
Top view
extended temperature range

EL6601 | Ethernet switch port terminal

The EL6601 Ethernet switch port terminal is used for the decentralised connection of Ethernet devices to the EtherCAT Terminal network. The EtherCAT system relays the Ethernet communication of the connected devices fully transparent and collision-free.

The switch port terminal can be installed at any location within the EtherCAT strand. No configuration is required.

Further benefits underline the particular suitability for the application in industrial environments:

Technical data EL6601
Number of Ethernet ports 1
Bus system all Ethernet (IEEE 802.3)-based protocols, store and forward switching mode
Ethernet interface 10BASE-T/100BASE-TX Ethernet with 1 x RJ45
Data transfer rates 10/100 Mbit/s, IEEE 802.3u auto-negotiation, half or full duplex at 10 and 100 Mbit/s possible, automatic settings
Cable length up to 100 m twisted pair
Hardware diagnosis status LEDs
Power supply via the E-bus
Distributed clocks
Electrical isolation 500 V (E-bus/Ethernet)
Protocol all Ethernet (IEEE 802.3)-based protocols, store and forward switching mode
Configuration no
Current consumption power contacts
Current consumption E-bus typ. 310 mA
Special features support of RT Ethernet, publisher/subscriber, DHCP/BootP address allovation (1 device)
Weight approx. 75 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE, UL, Ex
System  
Ethernet TCP/IP For further Ethernet TCP/IP products please see the system overview.