4-channel analog input terminal 0…10 V, single-ended, 12 bit EL3064
Run LED
Run LED
Run LED 
Run LED 
Power contact
+24 V
Power contact 0 V
Input 1
GND
Input 3
GND
Input 2
GND
Input 4
GND
Top view 
Contact assembly 
extended temperature range
extended shock and vibration range

EL3064 | 4-channel analog input terminal 0…10 V, single-ended, 12 bit

The EL3064 analog input terminal processes signals in the range between 0 and 10 V. The voltage is digitised with a resolution of 12 bits and is transmitted (electrically isolated) to the higher-level automation device. The EL3064 EtherCAT Terminal features 2-wire conductors for the four single-ended inputs with a common internal ground potential. The power contacts are connected through. The signal state of the EtherCAT Terminal is indicated by light emitting diodes.

Technical data EL3064 | ES3064
Number of inputs 4 (single-ended)
Power supply via the E-bus
Technology single-ended
Signal voltage 0…10 V
Distributed clocks
Internal resistance > 130 kΩ
Input filter limit frequency 1 kHz
Dielectric strength max. 30 V
Conversion time 0.625 ms default setting, configurable
Resolution 12 bit (16 bit presentation, incl. sign)
Measuring error < ±0.3 % (relative to full scale value)
Electrical isolation 500 V (E-bus/signal voltage)
Current consumption power contacts
Current consumption E-bus typ. 130 mA
Bit width in the process image inputs: 16 byte
Special features activatable FIR/IIR filters, limit value monitoring
Weight approx. 60 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL, Ex