1-, 2-channel analog input terminals 0…10 V, single-ended, 12 bit EL3061, ES3061
Run LED 
Power contact
+24 V
Power contact 0 V
Input 1
0 V
GND
Shield
+24 V
GND
Shield
Top view 
Contact assembly 
extended temperature range
extended shock and vibration range
1-, 2-channel analog input terminals 0…10 V, single-ended, 12 bit EL3062, ES3062
Run LED
Run LED 
Power contact
+24 V
Power contact 0 V
Input 1
0 V
GND
Shield
Input 2
+24 V
GND
Shield
Top view 
Contact assembly 
extended temperature range
extended shock and vibration range

EL3061, EL3062 | 1-, 2-channel analog input terminals 0…10 V, single-ended, 12 bit

The EL3061 and EL3062 analog input terminals process signals in the range between 0 and 10 V. The voltage is digitised to a resolution of 12 bits and is transmitted, electrically isolated, to the higher-level automation device. The input channels of an EtherCAT Terminal have the reference ground as common ground potential. The EL3061 is the single-channel version. The EL3062 combines two channels in one housing. The signal state of the EtherCAT Terminals is indicated by light emitting diodes.

Technical data EL3061 | ES3061 EL3062 | ES3062
Number of inputs 1 (single-ended) 2 (single-ended)
Power supply via the E-bus
Technology single-ended
Signal voltage 0…10 V
Distributed clocks
Internal resistance > 130 kΩ
Input filter limit frequency 1 kHz
Resolution 12 bit (16 bit presentation, incl. sign)
Conversion time 0.625 ms default setting, configurable
Measuring error < ±0.3 % (relative to full scale value)
Electrical isolation 500 V (E-bus/signal voltage)
Current consumption power contacts
Current consumption E-bus typ. 130 mA
Dielectric strength max. 30 V
Bit width in the process image inputs: 4 byte inputs: 8 byte
Special features activatable FIR/IIR filters, limit value monitoring
Weight approx. 60 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL, Ex
Special terminals
EL3062-0030 signal voltage 0…30 V