2-channel relay output terminal 230 V AC, 5 A, make contacts EL2602
Signal LED 2
Signal LED 1 
Power contact
120 V/230 V
Power contact N
Power contact PE
Output 1
Output 2
N
PE
Top view 
Contact assembly 

EL2602 | 2-channel relay output terminal 230 V AC, 5 A, make contacts

The EL2602 output terminal has two relays each of which has a single contact. The relay contact is connected to the power contacts, which are suitable for use at up to 230 V AC, and can be generally used for switching devices requiring mains power. The EtherCAT Terminal indicates its signal state by means of light emitting diodes.

Technical data EL2602 | ES2602
Connection technology relay output
Number of outputs 2 x make contacts for power contact
Nominal voltage 230 V AC/30 V DC
Load type ohmic, inductive, lamp load
Distributed clocks
Ohmic switching current 5 A AC/DC per channel
Inductive switching current 2 A AC/DC per channel
Minimum permitted load 10 mA at 5 V DC
Lamp test, electronic ballast 4 x 58 W
Current consumption E-bus typ. 170 mA
Electrical isolation 500 V (E-bus/field potential)
Current consumption power contacts load-dependent
Bit width in the process image 2 outputs
Operating cycles mech. (min.) 2 x 107
Operating cycles electr. (min.) 1 x 105 (5 A/30 V DC)
Configuration no address or configuration setting
Special features 1-wire connection possible
Weight approx. 50 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL