2-channel pulse width current terminal ±3.5 A, 50 V DC EL2545
Warning, Error
B neg, B pos
A neg, A pos
Power
Enable A, Enable B 
B neg, B pos 
A neg, A pos 
E-bus Run, power LVDT 
Power contact
+24 V
Power contact 0 V
Excitation A+, A-
LVDT A1, A2
Excitation B+, B-
LVDT B1, B2
Motor:
A1, A2
Motor B:
B1, B2
Load voltage
50 V, 0 V
Load voltage
50 V, 0 V
Top view 
Encoder/motor connection 

EL2545 | 2-channel pulse width current terminal ±3.5 A, 50 V DC

The EL2545 output terminal controls the output current via pulse width control of the supply voltage. It is galvanically isolated from the E-bus. The current value (0 to ±3.5 A) is specified by the automation device via a 16 bit value. The output stage is protected against overload and short-circuit. The EtherCAT Terminal has two channels that indicate their signal state via light emitting diodes. The LEDs simplify local diagnosis by displaying typical load and wiring faults.

Technical data EL2545 | ES2545
Connection technology PWM output, push-pull outputs
Number of outputs 2
Rated load voltage 8…50 V DC
Load type inductive > 1 mH
Auxiliary voltage 24 V DC via power contacts
Distributed clocks yes
Max. output current ±3.5 A (short-circuit-proof, thermal overload-proof) per channel
Short circuit current typ. < 5 A
PWM clock frequency 32 kHz default
Duty factor 0…100 % (current-controlled)
Resolution 12 bit
Reverse voltage protection yes
Current consumption E-bus typ. 180 mA
Current consumption auxiliary voltage typ. 10 mA
Electrical isolation 500 V (E-bus/field potential)
Current consumption power contacts typ. 50 mA + load
Bit width in the process image 48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status
Configuration no address setting, configuration via the controller
Special features with LVDT feedback
Weight approx. 50 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/see documentation
Pluggable wiring for all ESxxxx terminals
Product announcement
estimated market release on request