2-channel pulse width output terminal 24 V DC EL2502
Signal LED 2
Signal LED 1 
Power contact
+24 V
Power contact 0 V
Power contact PE
Output 1
Output 2
+24 V
0 V
PE
Top view 
Contact assembly 
extended shock and vibration range

EL2502 | 2-channel pulse width output terminal 24 V DC

The EL2502 output terminal modulates the pulse width of a binary signal and outputs it electrically isolated from the E-bus. The mark/space ratio is prescribed by a 16 bit value from the automation unit. The output stage is protected against overload and short-circuit. The EtherCAT Terminal has two channels that indicate their signal state via LEDs. The LEDs are driven in time with the outputs, and show the mark/space ratio by their brightness.

Technical data EL2502 | ES2502
Connection technology PWM output, push-pull outputs
Number of outputs 2
Rated load voltage 24 V DC (-15 %/+20 %)
Load type ohmic, inductive, lamp load
Distributed clocks
Max. output current 0.5 A (short-circuit-proof) per channel
Short circuit current typ. < 1.5 A
PWM clock frequency 20 Hz…20 kHz, 250 Hz default
Base frequency 1 Hz…125 kHz, 250 Hz default
Duty factor 0…100 % (TON > 750 ns, TOFF > 500 ns)
Resolution 9…15 bit
Reverse voltage protection yes
Current consumption E-bus typ. 150 mA
Electrical isolation 500 V (E-bus/field potential)
Current consumption power contacts typ. 30 mA + load
Bit width in the process image 2 x 16 bit PWM output
Configuration via TwinCAT System Manager
Special features separate frequency can be set for each channel
Weight approx. 50 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL, Ex