2-channel digital output terminal with oversampling EL2262
Signal LED2
Signal LED1 
Power contact
+24 V
Power contact 0 V
Power contact PE
Output 1
Output 2
+24 V
0 V
PE
Top view 
Contact assembly 
XFC – eXtreme Fast Control
extended shock and vibration range

EL2262 | 2-channel digital output terminal with oversampling

The EL2262 digital output terminal connects the binary control output signals at the process level with electrical isolation. The outputs are controlled with an adjustable, integer multiple (oversampling factor: n) of the bus cycle time (n microcycles per bus cycle). For each micro-cycle, the EtherCAT Terminal receives a process data block that is output consecutively. The time base of the terminal can be synchronised precisely with other EtherCAT devices via distributed clocks. This enables an output pattern with a significantly higher pulse sequence than the bus cycle time, exactly synchronised with the system time base. This procedure enables the temporal resolution of the digital output signals to be increased to n times the bus cycle time. The maximum output rate is 1 Msample/s.

Technical data EL2262 | ES2262
Connection technology 4-wire
Number of outputs 2
Rated load voltage 24 V DC (-15 %/+20 %)
Load type ohmic, inductive, lamp load
Oversampling factor n = integer multiple of the cycle time, 1…1,000
Distributed clocks yes
Distributed clock precision << 1 µs
Max. output current 0.5 A (short-circuit-proof in push operation) per channel
Short circuit current typ. < 1.5 A
Reverse voltage protection yes
Current limitation typ. 4 A/150 μs
Breaking energy < 150 mJ/channel
Switching times typ. TON: < 1 µs, typ. TOFF: < 1 µs
Output stage push-pull
Output rate max. 1 Msample/s, min. cycle 1 µs
Current consumption E-bus typ. 70 mA
Electrical isolation 500 V (E-bus/field potential)
Current consumption power contacts typ. 35 mA + load
Bit width in the process image n x 2 outputs + 32 bit CycleCounter + 32 bit StartTimeNextOutput
Configuration via TwinCAT System Manager
Special features up to 1,000 x oversampling, max. 1 Msample/s, min. output cycle 1 µs
Weight approx. 60 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL, Ex
Further information  
XFC eXtreme Fast Control Technology