4-channel digital output terminal 5 V DC EL2124
Signal LED 4
Signal LED 2
Signal LED 3 
Signal LED 1 
Power contact
+5 V
Power contact 0 V
Output 1
Output 3
Output 2
+5 V
0 V
Output 4
Top view 
Contact assembly 
extended shock and vibration range

EL2124 | 4-channel digital output terminal 5 V DC

The EL2124 digital output terminal connects the binary control signals from the automation unit on to the actuators at the process level with electrical isolation. The load current outputs of the EL2124 are protected against overload and short circuit. The EtherCAT Terminal has four channels that indicate their signal state via light emitting diodes.

Technical data EL2124 | ES2124
Connection technology 2-/3-wire
Number of outputs 4
Rated load voltage 5 V DC
Load type ohmic, lamp load
Distributed clocks
Max. output current ±20 mA (short-circuit-proof) per channel, type CMOS output/push-pull
Short circuit current typ. < 50 A
Reverse voltage protection
Breaking energy
Switching times typ. TON: < 1 µs, typ. TOFF: < 1 µs
Current consumption E-bus typ. 130 mA
Electrical isolation 500 V (E-bus/field potential)
Current consumption power contacts typ. 12 mA + load
Bit width in the process image 4 outputs
Configuration no address or configuration setting
Special features fast 5 V output
Weight approx. 70 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL, Ex