2-channel digital output terminal 24 V DC, 2 A EL2032
Error LED2
Signal LED 2
Error LED1 
Signal LED 1 
Power contact
+24 V
Power contact 0 V
Power contact PE
Output 1
+24 V
0 V
Output 2
PE
Top view 
Contact assembly 
extended temperature range
extended shock and vibration range

EL2032 | 2-channel digital output terminal 24 V DC, 2 A

The EL2032 digital output terminal connects the binary control signals from the automation unit on to the actuators at the process level with electrical isolation. The EtherCAT Terminal offers short-circuit protection of the outputs and contains two channels that indicate their signal state by means of light emitting diodes.

The EL2032 enables direct connection of two 3-wire actuators; diagnostic LEDs and input bits indicate short circuits and wire breakage.

Technical data EL2032 | ES2032
Connection technology 4-wire
Number of outputs 2
Rated load voltage 24 V DC (-15 %/+20 %)
Load type ohmic, inductive, lamp load
Distributed clocks
Max. output current 2.0 A (short-circuit-proof) per channel
Short circuit current typ. < 70 A
Reverse voltage protection yes
Breaking energy < 1.7 J/channel
Switching times typ. TON: 40 µs, typ. TOFF: 200 µs
Current consumption E-bus typ. 100 mA
Electrical isolation 500 V (E-bus/field potential)
Current consumption power contacts typ. 13 mA + load
Bit width in the process image 2 outputs, 2 inputs (diagnostics)
Configuration no address or configuration setting
Weight approx. 55 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL, Ex