4-channel digital input terminal 24 V DC, 10 µs EL1014
Signal LED4
Signal LED2
Signal LED3 
Signal LED1 
Power contact
+24 V
Power contact 0 V
Input 1
+24 V
+24 V
Input 3
Input 2
Input 4
Top view 
Contact assembly 
extended temperature range
extended shock and vibration range

EL1014 | 4-channel digital input terminal 24 V DC, 10 µs

The EL1014 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Digital input terminals from the EL101x series have a 10 µs input filter. The EtherCAT Terminals indicate their state via an LED.

Technical data EL1014 | ES1014
Connection technology 2-wire
Specification EN 61131-2, type 1/3
Number of inputs 4
Nominal voltage 24 V DC (-15 %/+20 %)
“0“ signal voltage -3…+5 V (EN 61131-2, type 3)
“1“ signal voltage 15…30 V (EN 61131-2, type 3)
Input current typ. 3 mA (EN 61131-2, type 3)
Input filter typ. 10 µs
Distributed clocks
Current consumption power contacts typ. 2 mA + load
Current consumption E-bus typ. 90 mA
Electrical isolation 500 V (E-bus/field potential)
Bit width in the process image 4 inputs
Configuration no address or configuration setting
Special features standard input terminals f0r 2-wire connection
Weight approx. 50 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL, Ex