Ethernet Bus Coupler EK9000
Power LEDs
E-bus
Coupler
supply
Input for
power contacts
Power contacts
Front flap
Link/Act
Ethernet
Link/Act
Ethernet
Address selector

EK9000 | Ethernet Bus Coupler

EthernetThe EK9000 Bus Coupler connects Ethernet networks to the EtherCAT Terminals (ELxxxx) as well as the EtherCAT Box modules (EPxxxx) and converts the telegrams from Ethernet to the E-bus signal representation. One station consists of an EK9000 and any number of EtherCAT Terminals. The coupler is connected to Ethernet via RJ45. In EtherCAT, the Ethernet coupler has at its disposal a lower-level, powerful and ultra-fast I/O system with a large selection of terminals. The coupler supports the Modbus TCP protocol and fits seamlessly into Ethernet networks.

Technical data EK9000
Task within EtherCAT system coupling of standard digital and analog EtherCAT Terminals and EtherCAT Box modules to Ethernet networks
Number of EtherCAT Terminals depending on the process data size
Type/number of peripheral signals depending on the process data size
Protocol Modbus TCP, Modbus UDP
Data transfer rates 100 Mbaud
Configuration not required
Bus interface 2 x RJ45 (switched)
Power supply 24 V DC (-15 %/+20 %)
Input current typ. 120 mA + (total E-bus current)/4
Current consumption E-bus up to 2 A
Power contacts 24 V DC max./10 A max.
Electrical isolation 500 V (power contact/supply voltage/Ethernet)
Dimensions (W x H x D) 64 mm x 100 mm x 73 mm
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE, UL, Ex
Accessories  
Cordsets cordsets and connectors
FC9001-0010 | FC9011 Ethernet PCI fieldbus cards
System  
Ethernet TCP/IP For further Ethernet TCP/IP products please see the system overview