CX90x0-A001/N0xx
 
Compact flash module

Compact flash module

DVI/USB interface

DVI/USB interface

RS232 interface

RS232 interface

RS422/RS485 interface

RS422/RS485 interface

4-port USB hub

4-port USB hub

 

CX90x0-A001/N0xx | System interfaces

A number of optional interface modules are available for the CX9000/CX9010 Embedded PCs that can be connected to the basic module ex factory. The system interfaces cannot be retrofitted or expanded in the field. They are supplied ex factory in the specified configuration and cannot be separated from the CPU module. The power supply of the system interface modules is ensured via the internal bus.

The CX90x0-N010 option connects Beckhoff Control Panels or standard monitors with DVI or VGA input via the DVI or USB interfaces. Devices such as printer, scanner, mouse, keyboard, etc. can be connected via the USB 2.0 interfaces. The CX90x0-N030 module offers two additional serial RS232 interfaces with a maximum transmission speed of 115 kbaud. Alternatively, the two serial interfaces are also available as RS422/RS485 signal types (CX90x0-N031). The CX90x0-N070 4-port USB hub extends the number of available USB 2.0 ports, whereby each port can handle a load of max. 500 mA (however, not all four at the same time). In this way, a total of six USB interfaces per CX are available to the user.

If additional mass storage is required, the CX90x0-A001 extension module provides a Compact Flash interface for type I or II CF cards. Unlike other system interfaces, this module can be upgraded in the field. Cards may only be inserted or removed when the system is switched off.

Technical data CX90x0-A001 CX90x0-N010 CX90x0-N030
Interfaces Compact Flash module 1 x DVI + 2 x USB 2.0 (max. 500 mA per port) 1 x COM1 + 1 x COM2, RS232
Type of connection Compact Flash slot for type I + II cards DVI-I 29-pin socket + 2 USB ports type A 2 x D-sub plug, 9-pin
Properties Compact Flash mass storage DVI-I interface also carries out VGA signals (DVI-A) max. baud rate 115 kbaud, cannot be used simultaneously with N031
Power supply via system bus (through power supply unit in the CX9000/CX9010)
Dimensions (W x H x D) 19 mm x 100 mm x 51 mm
Weight approx. 80 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20
Approvals CE, UL
Technical data CX90x0-N031 CX90x0-N070
Interfaces 1 x COM1 + 1 x COM2, RS422/RS485 4 x USB 2.0
Type of connection 2 x D-sub socket, 9-pin 4 x USB ports type A
Properties max. baud rate 115 kbaud, cannot be used simultaneously with N030 max. baud rate 480 Mbit/s, max. output current per port 500 mA, max. total current 500 mA
Power supply via system bus (through power supply unit in the CX9000/CX9010)
Dimensions (W x H x D) 19 mm x 100 mm x 51 mm
Weight approx. 80 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20
Approvals CE, UL