Embedded PC with Intel® Atom™ processor CX5140
Ethernet and
USB connection
DVI connection
Optional interfaces
e. g. RS232, PROFIBUS,
extended temperature range

CX5140 | Embedded PC with Intel® Atom™ processor

CX5120, CX5130 and CX5140 are Embedded PCs from the CX5100 series based on the Intel® Atom™ multi-core processors. They differ from one another in housing width and CPU type. What is new is that the available Atom™ CPUs now also introduce genuine multi-core technology, extending up to quad-core, into the compact Embedded PC segment. Since the new devices are an extension of the existing CX5000 series, they are equipped with identical hardware interfaces. Two independent Gigabit-capable Ethernet interfaces as well as four USB 2.0 and one DVI-I interface are available. A multitude of further connection options and gateway functions is created by the multi-option interface, which can be pre-equipped ex factory, as well as the I/O level, which can optionally consist of either E-Bus or K-Bus Terminals.

All devices in the series are characterised by low power consumption and fanless design.

Depending on the installed TwinCAT runtime environment, the CX5100 can be used for implementing PLC or PLC/Motion Control projects with or without visualisation. The execution of Motion Control applications with interpolating axis movements is also possible.

The extended operating temperature range from -25 to +60 °C enables the use of the CX5100 Embedded PCs in climatically demanding environments.

Like the CX5000, the CX5100 series has a compact design; a modular device with extension modules like in the CX2000 series is not available.


The order number of the basic CPU module can be derived as follows:

CX5140 Embedded PC with Intel® Atom™ processor

Technical data CX5140
Processor Intel® Atom™ E3845, 1.91 GHz
Number of cores 4
Flash memory slot for CFast card (card not included), slot for microSD card
Internal main memory 4 GB DDR3 RAM (not expandable)
Persistent memory integrated 1-second UPS (1 MB on CFast card)
Interfaces 2 x RJ45, 10/100/1000 Mbit/s, DVI-I, 4 x USB 2.0, 1 x optional interface
Diagnostics LED 1 x power, 1 x TC status, 1 x flash access, 2 x bus status
Clock internal battery-backed clock for time and date (battery exchangeable)
Operating system Microsoft Windows Embedded Compact 7,
Microsoft Windows Embedded Standard 7 P,
Microsoft Windows 10 IoT Enterprise LTSB
Control software TwinCAT 3
TwinCAT 2 PLC runtime, NC PTP runtime, NC I runtime
I/O connection E-bus or K-bus, automatic recognition
Power supply 24 V DC (-15 %/+20 %)
Current supply E-bus/K-bus 2 A
Max. power loss 12 W (including the system interfaces)
Dimensions (W x H x D) 142 mm x 100 mm x 92 mm
Weight approx. 960 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20
Approvals CE, UL, Ex, IECEx
TC3 performance class performance plus (50); please see here for an overview of all the TwinCAT 3 performance classes
Ordering information no operating system Windows Embedded Compact 7 Windows Embedded Standard 7 P 32 bit Windows Embedded Standard 7 P 64 bit Windows 10 IoT Enterprise LTSB 32 bit Windows 10 IoT Enterprise LTSB 64 bit no TwinCAT TwinCAT 2 PLC runtime TwinCAT 2 NC PTP runtime TwinCAT 2 NC I runtime TwinCAT 3 runtime (XAR)
CX5140-0100 x x
CX5140-0110 x x
CX5140-0111 x x
CX5140-0112 x x
CX5140-0113 x x
CX5140-0115 x x
CX5140-0120 x x
CX5140-0121 x x
CX5140-0122 x x
CX5140-0123 x x
CX5140-0125 x x
CX5140-0130 x x
CX5140-0135 x x
CX5140-0140 x x
CX5140-0141 x x
CX5140-0142 x x
CX5140-0143 x x
CX5140-0150 x x
CX5140-0155 x x
CX1900-0101 DVI-to-VGA passive adaptor for connecting a standard desktop VGA monitor to the CX system (singles out the VGA signals of the DVI-I interface).
CX2900-00xx CFast cards: 2, 4, 8, 16, 32 GB CFast card
CX2900-0107 Device modification for CX5120, CX5130, CX5140 and CX9020 Embedded PCs /according to the requirements for ATEX and IECEx certification.
The modification is mandatory for the usage of CX5120, CX5130, CX5140 and CX9020 in hazardous areas, Zone 2/22.
It includes the modification and repositioning of the device label as well as a mounting bracket installed ex works for mechanical locking of the connectors.
Product labeling:
ATEX: II 3 G Ex nA IIC T4 Gc
Read the device documentation for use in hazardous areas carefully.
Optional interfaces  
CX5140-N010 DVI-D interface, additional DVI-D port for clone or extended desktop operation
CX5140-N011 DisplayPort interface, additional DisplayPort for clone or extended desktop operation
CX5140-N020 audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround
CX5140-N030 RS232 interface, D-sub plug, 9-pin
CX5140-N031 RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on
CX5140-N031-0001 RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on
CX5140-N031-0002 RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off
CX5140-N031-0003 RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off
CX5140-N031-0004 RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on
CX5140-B110 EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
CX5140-M310 PROFIBUS master interface, D-sub socket, 9-pin
CX5140-B310 PROFIBUS slave interface, D-sub socket, 9-pin
CX5140-M510 CANopen master interface, D-sub plug, 9-pin
CX5140-B510 CANopen slave interface, D-sub plug, 9-pin
CX5140-M930 PROFINET RT, controller interface, Ethernet (2 x RJ45)
CX5140-B930 PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
CX5140-B931 PROFINET IRT, device interface, Ethernet (2 x RJ45 switched), in combination with TwinCAT 3 only
CX5140-B950 EtherNet/IP slave interface, Ethernet (2 x RJ45 switched)
Product announcement
CX5140-B931, CX5140-B950: estimated market release on request