Basic CPU module CX2062
Ethernet and
USB connection
DVI connection
Multi optional
interface
(e.g. RS232, PROFIBUS,
CANopen)
 Status
 LEDs
Battery compartment
(behind the flap)
CFast
extended temperature range

CX2062 | Basic CPU module

The CX2062 has an Intel® Xeon® CPU with a clock rate of 2.0 GHz (8 cores). A fan with ball bearings and speed monitoring is integrated into the basic CPU module. In addition to the CPU, the basic module also contains the main memory with a size of 8 GB RAM, optionally available with up to 32 GB. The controller boots from a CFast flash memory card where both the operating system as well as user programs and data are stored.

The CPU has an internal 128 kB NOVRAM, which acts as a persistent data memory if no UPS is used.

Microsoft Windows 10 IoT Enterprise LTSB 64 bit is used as operating system. The use of TwinCAT 3 allows automation tasks to be distributed across the various cores of the Intel® Xeon® CPU.

All system modules from the CX2000 series for left- or right-sided functional extensions can be connected. Internally the modules are connected via PCI Express and can be plugged to the CPU in the field.

The power supply for the CPU module comes from a CX2100-0014 or CX2100-0914 power supply module. Up to two mass storage modules (either CX2550-0010 CFast modules or CX2550-0020 2½-inch SSD modules) can be plugged in between the power supply unit and the CPU, allowing the use of up to three mass storage devices in total.

 

The order identifier of the basic CPU module is derived as follows:

CX2062 Basic CPU module

Technical data CX2062
Processor Intel® Xeon® D-1548 2.0 GHz, 8 cores (TC3: 80)
Number of cores 8
Graphics AMD E6465, 2 GB GDDR5
Flash memory slot for CFast card, card not included
Internal main memory 8 GB DDR4 RAM (optionally expandable)
Persistent memory 128 KB NOVRAM integrated
Interfaces 2 x RJ45, 10/100/1000 Mbit/s, 4 x USB 3.0, 1 x DVI-I
Cooling integrated fan with ball bearings and speed monitoring
Diagnostics LED 1 x power, 1 x TC status, 1 x flash access, 2 x bus status
Clock internal battery-backed clock for time and date (battery exchangeable)
Operating system Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch (LTSB), 64 bit
Control software TwinCAT 3 runtime (XAR)
I/O connection via power supply module (E-bus or K-bus, automatic recognition)
Power supply 24 V DC (-15 %/+20 %)
Max. power loss 110 W
Dimensions (W x H x D) 204 mm x 99 mm x 91 mm
Weight approx. 1300 g
Operating/storage temperature -25…+50 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20
Approvals CE
TC3 performance class very high performance (80); please see here for an overview of all the TwinCAT 3 performance classes
Ordering information no operating system Windows 10 IoT Enterprise LTSB 64 bit no TwinCAT TwinCAT 3 runtime (XAR)
CX2062-0100 x x
CX2062-0150 x x
CX2062-0155 x x
Accessories  
CX2900-0205 memory extension to 16 GB DDR4 RAM, instead of 8 GB DDR4 RAM
CX2900-0206 memory extension to 32 GB DDR4 RAM, instead of 8 GB DDR4 RAM
CX2900-0103 Spare fan cartridge for CX2040, CX2042, CX2062, CX2072 and CX2020, CX2030 with fan option
– cartridge consisting of chassis and 60 mm fan
– simple exchange in the field due to wireless installation
– dimensions (W x H x D) 67 x 62 x 16 mm
CX1900-0102 Spare battery suitable for CX10x0, CX50x0, CX51x0, CX90x0, CX20xx
– lithium button cell type CR2032, 3V/225 mAh
– follow polarity when installing
Optional interfaces  
CX2062-N010 DVI-D interface, additional DVI-D port for clone or extended desktop operation
CX2062-N011 DisplayPort interface, additional DisplayPort for clone or extended desktop operation
CX2062-N030 RS232 interface, D-sub plug, 9-pin
CX2062-N031 RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on
CX2062-N031-0001 RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on
CX2062-N031-0002 RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off
CX2062-N031-0003 RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off
CX2062-N031-0004 RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on
CX2062-B110 EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
CX2062-M310 PROFIBUS master interface, D-sub socket, 9-pin
CX2062-B310 PROFIBUS slave interface, D-sub socket, 9-pin
CX2062-M510 CANopen master interface, D-sub plug, 9-pin
CX2062-B510 CANopen slave interface, D-sub plug, 9-pin
CX2062-M930 PROFINET RT, controller interface, Ethernet (2 x RJ45)
CX2062-B930 PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
CX2062-B931 PROFINET IRT, device interface, Ethernet (2 x RJ45 switched), in combination with TwinCAT 3 only
CX2062-B950 EtherNet/IP slave interface, Ethernet (2 x RJ45 switched)
Product announcement
estimated market release 4th quarter 2017