AX8000 accessories
 

Accessories for AX8000 Servo Drives at AM8xxx

Motor cables 1 mm² with iTec plug system for AM801x, AM802x, AM803x and AM853x at AX8108 and AX8206

Ordering information Motor cable with 1 mm² wire gauge, highly flexible for drag-chain use
ZK4800-8022-xxxx highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
ZK4800-8022-0050 example for 5 m length
ZK4501-8022-xxxx extension cable

Motor cables 1.5 mm² with M23 speedtec® plug for AM883x and AM8x4x up to AM8x6x (up to winding code P) at AX8108 and AX8206

Ordering information Motor cable with 1.5 mm² wire gauge, fixed installation Pict.
ZK4800-8003-xxxx cables for fixed installation
min. bending radius = 61 mm (5 x OD),
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22))
 
ZK4800-8003-0050 example for 5 m length  
ZK4501-8003-xxxx extension cable
A

For maximum cable lenghts and further specifications see data sheet


A
ZK4501-8003-xxxx
 
Ordering information Motor cable with 1.5 mm² wire gauge, highly flexible for drag-chain use Pict.
ZK4800-8023-xxxx highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22))
 
ZK4800-8023-0050 example for 5 m length  
ZK4501-8023-xxxx extension cable
B
B
ZK4501-8023-xxxx
 

Motor cables 2.5 mm² with M23 speedtec® plug for AM8x4x up to AM8x6x (up to winding code P) at AX8118

Ordering information Motor cable with 2.5 mm² wire gauge, fixed installation Pict.
ZK4800-8004-xxxx cables for fixed installation
min. bending radius = 69 mm (5 x OD),
(4 x 2.5 mm² + (2 x 1 mm²) + (2 x AWG22))
 
ZK4800-8004-0050 example for 5 m length  
ZK4501-8004-xxxx extension cable
A
A
ZK4501-8004-xxxx
 
Ordering information Motor cable with 2.5 mm² wire gauge, highly flexible for drag-chain use Pict.
ZK4800-8024-xxxx highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 97 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 2.5 mm² + (2 x 1 mm²) + (2 x AWG22))
 
ZK4800-8024-0050 example for 5 m length  
ZK4501-8024-xxxx extension cable
B
B
ZK4501-8024-xxxx
 

Brake energy management

Ordering information AX2090-BW80-xxxx | Ballast resistors
AX2090-BW80-1000 external ballast resistor for AX8620-1000 and AX8640-0000 supply modules, 1.0 kW, 18 Ω (1)
AX2090-BW80-1600 external ballast resistor for AX8620-0000 supply modules, 1.6 kW, 33 Ω (1)
AX2090-BW80-2000 external ballast resistor for AX8640-1000 supply modules, 2.0 kW, 18 Ω (2)
AX2090-BW80-3200 external ballast resistor for AX8640-0000 supply modules, 3.2 kW, 18 Ω (2)

Recommended supply cables: (1) ZK4000-2101-2xxx (1.5 mm²), (2) ZK4000-2102-2xxx (2.5 mm²)


Ordering information Connection cable ballast resistors Pict.
ZK4000-2101-2zzz Connection cable, not assembled, (4 x 1.5 mm² + (2 x 1 mm²))
A
ZK4000-2102-2zzz Connection cable, not assembled, (4 x 2.5 mm² + (2 x 1 mm²))
B
ZK4509-8025-xzzz Connection cable, not assembled, (4 x 4 mm² + (2 x 1 mm²))
C
ZK4000-2104-2zzz Connection cable, not assembled, (4 x 6 mm² + (2 x 1.5 mm²))  

zzz = ordering indication of the length of material in decimetres, e.g. ZK4000-2102-2100 = 10 metres


A
ZK4000-2101-2zzz
B
ZK4000-2102-2zzz
C
ZK4509-8025-xzzz