Accessories
 

Supply cables for AX5000 Servo Drives at AM3000 and AM3500

Motor cables 1 mm² with iTec plug system for AM301x-wxyz-0005 (with yTec plug) at AX5000 (1.5…6 A)

Ordering information Motor cable with 1 mm² wire gauge, highly flexible for drag-chain use
ZK4500-8022-xxxx highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
ZK4500-8022-0050 example for 5 m length
ZK4501-8022-xxxx extension cable

For maximum cable lenghts and further specifications see data sheet


Motor cables 1.5 mm² for AM30xx (up to winding code L) and AM35xx at AX5000 (1.5…12 A)

Ordering information Motor cable with 1.5 mm² wire gauge, fixed installation
ZK4500-0003-xxxx cables for fixed installation
min. bending radius = 203 mm (18 x OD),
length < 25 m,
(4 x 1.5 mm²+ 2x (2 x 0.75 mm²))
ZK4500-0003-0050 example for 5 m length
ZK4502-0003-xxxx length ≥ 25 m
ZK4509-0003-xxxx not assembled
ZK4501-0003-xxxx extension cable
Ordering information Motor cable with 1.5 mm² wire gauge, highly flexible, for drag-chain use
ZK4500-0023-xxxx highly flexible, drag-chain useable cable (5 million bending cycles), max. 240 m/min, max. 30 m/s²,
min. bending radius = 87 mm (7 x OD), max. chain length horizontal 20 m, vertical 5 m, length < 25 m,
(4 x 1.5 mm² + 2 x (2 x 0.75 mm²))
ZK4500-0023-0050 example for 5 m length
ZK4502-0023-xxxx length ≥ 25 m
ZK4509-0023-xxxx not assembled
ZK4501-0023-xxxx extension cable

For maximum cable lenghts and further specifications see datasheet ZK4509-0023-xxxx


Motor cables 2.5 mm² for AM30xx (up to winding code P) and AM35xx at AX5000 (18…25 A)

Ordering information Motor cable with 2.5 mm² wire gauge, fixed installation
ZK4500-0004-xxxx cables for fixed installation
min. bending radius = 238 mm (18 x OD),
length < 25 m,
(4 x 2.5 mm² + 2 x (2 x 1 mm²))
ZK4500-0004-0050 example for 5 m length
ZK4502-0004-xxxx length ≥ 25 m
ZK4509-0004-xxxx not assembled
ZK4501-0004-xxxx extension cable
Ordering information Motor cable with 2.5 mm² wire gauge, highly flexible, for drag-chain use Pict.
ZK4500-0024-xxxx highly flexible, drag-chain useable cable (5 million bending cycles), max. 240 m/min, max. 30 m/s²,
bending radius = 95 mm (7 x OD), max. chain length horizontal 20 m, vertical 5 m, length < 25 m,
(4 x 2.5 mm² + 2 x (2 x 1 mm²))
A
ZK4500-0024-0050 example for 5 m length  
ZK4502-0024-xxxx length ≥ 25 m  
ZK4509-0024-xxxx not assembled  
ZK4501-0024-xxxx extension cable
B

For maximum cable lenghts and further specifications see datasheet ZK4509-0024-xxxx


A
ZK4500-0024-xxxx
B
ZK4501-0024-xxxx
 

Motor cables 4 mm² for AM307x (winding code Q) at AX5000 (25 A)

Ordering information Motor cable with 40 mm² wire gauge, flexible, suitable as trailing cable Pict.
ZK4500-0015-xxxx dynamic, suitable as trailing cable (5 million bending cycles), max. 180 m/min, max. 5 m/s²,
min. bending radius = 150 mm (10 x OD),
4 x 4 + 2 x 1 + (2 x 1.5 mm²), length < 25 m
A
ZK4500-0015-0050 example for 5 m length  
ZK4502-0015-xxxx length ≥ 25 m  
ZK4509-0015-xxxx not assembled  
ZK4501-0015-xxxx extension cable
B
A
ZK4500-0015-xxxx
B
ZK4501-0015-xxxx
 

Motor cables 10 mm² for AM307x (winding code Q) at AX5000 (40 A)

Ordering information Motor cable with 10 mm² wire gauge, flexible, suitable as trailing cable
ZK4500-0017-xxxx dynamic, suitable as trailing cable (5 million bending cycles), max. 180 m/min, max. 5 m/s²,
min. bending radius = 225 mm (10 x OD),
4 x 10 + 2 x 1 + 2 x 1.5 mm², assembled at both ends
ZK4500-0017-0050 example for 5 m length
ZK4509-0017-xxxx not assembled
ZK4501-0017-xxxx extension cable

For maximum cable lenghts and further specifications see datasheet ZK4509-0017-xxxx


Motor cables 10 mm² for AM308x at AX5000 (40 A)

Ordering information Motor cable with 10 mm² wire gauge, flexible, suitable as trailing cable
ZK4505-0017-xxxx dynamic, suitable as trailing cable (5 million bending cycles), max. 180 m/min, max. 5 m/s²,
min. bending radius = 225 mm (10 x OD),
4 x 10 + 2 x 1 + 2 x 1.5 mm², assembled at one end (controller end)
ZK4505-0017-0050 example for 5 m length

Encoder cables (absolute encoder) for AM3000 and AM3500 at AX5000

Ordering information Encoder cable with 0.14 mm² wire gauge, fixed installation Pict.
ZK4510-0000-xxxx cables for fixed installation
min. bending radius = 137 mm (18 x OD)
(7 x 2 x 0.14 mm² + 2 x 0.5mm²)
A
ZK4510-0000-0050 example for 5 m length  
ZK4511-0000-xxxx extension cable for fixed installation
B
ZK4519-0000-xxxx not assembled  
A
ZK4510-0000-xxxx
B
ZK4511-0000-xxxx
 
Ordering information Encoder cable with 0.14 mm² wire gauge, highly flexible, for drag-chain use Pict.
ZK4510-0020-xxxx highly flexible, drag-chain usable cable (5 million bending cycles), max. 240 m/min, max. 30 m/s²,
min. bending radius = 53 mm (7 x OD), max. chain length: horizontal = 20 m, vertical = 5 m,
(7 x 2 x 0.14 mm² + 2 x 0.5 mm²)
C
ZK4510-0020-0050 example for 5 m length  
ZK4511-0020-xxxx extension cable, highly dynamic, suitable as trailing cable
D
ZK4519-0020-xxxx not assembled  
C
ZK4510-0020-xxxx
D
ZK4511-0020-xxxx
 

Encoder cables with iTec plug system for AM301x-wxyz-0005 (yTec plug) at AX5000

Ordering information Encoder cable with 0.25 mm² wire gauge, flexible, suitable as trailing cable
ZK4510-8110-xxxx flexible, suitable as trailing cable (5 million bending cycles), max. 120 m/min, max. 4 m/s²,
min. bending radius = 75 mm (10 x OD), max. chain length horizontal 20 m, vertical 5 m,
4 x 2 x 0.25 mm², max. length 100 m
ZK4510-8110-0050 example for 5 m length
ZK4511-8110-xxxx extension cable

Resolver cables for AM3000 and AM3500 at AX5000

Ordering information Resolver cable with 4 x 2 x 0.25 mm² wire gauge Pict.
ZK4530-0010-xxxx dynamic, suitable as trailing cable (5 million bending cycles), max. 120 m/min, max. 4 m/s²,
bending radius = 75 mm (10 x OD)
A
ZK4530-0010-0050 example for 5 m length  
ZK4531-0010-xxxx extension cable
B
ZK4539-0010-xxxx not assembled  
A
ZK4530-0010-xxxx
B
ZK4531-0010-xxxx
 

Resolver cables with iTec plug system for AM301x-wxyz-0005 (yTec plug) at AX5000

Ordering information Resolver cable with 0.25 mm² wire gauge, flexible, for drag-chain use
ZK4530-8110-xxxx flexible, drag-chain suitable cable with 5 million bending cycles, max. 120 m/min, max. 4 m/s²,
min. bending radius = 75 mm (10 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
4 x 2 x 0.25 mm²
ZK4530-8110-0050 example for 5 m length
ZK4531-8110-xxxx extension cable