Beckhoff XTS Standard AT9xxx-xxxx | XTS guide rails
AT9xxx-xxxx
 
AT9xxx-xxxx XTS guide rails

AT9xxx-xxxx | XTS guide rails

The guide rail with the matching movers makes the XTS system a ready-to-use solution. However, the motor modules can also be used together with the magnetic plate sets as a custom solution without the XTS guide rail. The movers can be removed or inserted without tools through a lock by releasing two screws and removing part of the rail.

Movers and guide rail are optimally matched to each other. The geometry of the aluminium rail and the hard anodised aluminium of the surface in combination with the running surface of the mover rollers allow good running characteristics and low wear.

AT9xxx-xxxx XTS guide rails | AT9142-2000

AT9142-2000

AT9xxx-xxxx XTS guide rails | AT9040-0500

AT9040-0500

 
AT9xxx-xxxx XTS guide rails | AT9020-0500

AT9020-0500

AT9xxx-xxxx XTS guide rails | AT9025-0500

AT9025-0500

 
Technical data AT9000-xxxx AT9050-0500 AT9100-xxxx
Design form straight curved straight with lock
Length 250-mm steps 250-mm steps
Surface hard anodised
Material aluminium
Ordering information XTS guide rails available to suit the motor modules
AT9020-0500 guide rail, 500 mm, 22.5° curve (positive curve, convex, radius constant), for AT9011-0050-xxxx, suitable for
1 x straight motor module AT200x-0250 with/without feed and 1 x 22.5° motor module AT202x-0250 with/without feed
AT9025-0500 guide rail, 500 mm, - 22.5° curve (negative curve, concave, radius constant), for AT9011-0050-xxxx, suitable for
1 x straight motor module AT200x-0250 with/without feed and 1 x - 22.5° motor module AT202x-0250 with/without feed
AT9040-0500 guide rail, 500 mm, 45° curve (positive curve, convex, radius constant), for AT9011-0050-xxxx, suitable for 1 x straight motor module AT200x-0250 with/without feed and 1 x 45° motor module AT204x-0250 with/without feed
AT9040-0750 guide rail, 750 mm, 90° curve (positive curve, convex, radius constant), for AT9011-0050-xxxx, suitable for 1 x straight motor module AT200x-0250 with/without feed and 2 x 45° motor module AT204x-0250 with/without feed
AT9040-1250 guide rail set, 1250 mm, 180° curve (positive curve, convex, radius constant, 2 parts), for AT9011-0050-xxxx, consisting of
 
1 x AT9040-1250-1050 guide rail, 750 mm, 90° curve, suitable for 1 x straight motor module AT200x-0250 with/without feed and 2 x 45° motor module AT204x-0250 with/without feed
 
1 x AT9040-1250-2050 guide rail, 500 mm, 90° curve, suitable for 2 x 45° motor module AT204x-0250 with/without feed
AT9142-2000 guide rail set, 2000 mm, 360° circle (positive curve, convex, radius constant, 4 parts), for AT9011-0050-xxxx, consisting of
 
1 x AT9142-2000-1050 guide rail, 500 mm, 90° curve with gate, suitable for 2 x 45° motor module AT204x-0250 with/without feed
 
3 x AT9142-2000-2050 guide rail, 500 mm, 90° curve, suitable for 2 x 45° motor module AT204x-0250 with/without feed
AT9050-0500 guide rail, 500 mm, 180° curve (clothoid, radius not constant), for AT9011-0050-xxxx or AT9012-0050-xxxx, suitable for 1 x 180° motor module AT2050-0500
AT9100-xxxx guide rails, straight, with lock, in steps of 250 mm in length, overall length up to 6 m
AT9100-0250 guide rail, 250 mm, straight with gate, suitable for 1 x straight motor module AT200x-0250 with/without feed
AT9100-0500 guide rail, 500 mm, straight with gate, suitable for 2 x straight motor module AT200x-0250 with/without feed
AT9100-0750 guide rail, 750 mm, straight with gate, suitable for 3 x straight motor module AT200x-0250 with/without feed
AT9100-1000 guide rail, 1000 mm, straight with gate, suitable for 4 x straight motor module AT200x-0250 with/without feed
AT9100-1250 guide rail, 1250 mm, straight with gate, suitable for 5 x straight motor module AT200x-0250 with/without feed
AT9100-1500 guide rail, 750 mm, straight with gate, suitable for 6 x straight motor module AT200x-0250 with/without feed
AT9000-xxxx guide rails, straight, in steps of 250 mm in length, overall length up to 2.5 m, on request
AT9000-0250 guide rail, 250 mm, straight, suitable for 1 x straight motor module AT200x-0250 with/without feed
AT9000-0500 guide rail, 500 mm, straight, suitable for 2 x straight motor module AT200x-0250 with/without feed
AT9000-0750 guide rail, 750 mm, straight, suitable for 3 x straight motor module AT200x-0250 with/without feed
AT9000-1000 guide rail, 1000 mm, straight, suitable for 4 x straight motor module AT200x-0250 with/without feed
AT9000-1250 guide rail, 1250 mm, straight, suitable for 5 x straight motor module AT200x-0250 with/without feed
AT9000-1500 guide rail, 1500 mm, straight, suitable for 6 x straight motor module AT200x-0250 with/without feed
Further XTS products  
AT20xx-0xxx XTS motor module
AT901x-0050-0550 XTS mover
AT2000-xx00 XTS starter kit
TF5850-00pp software license, TwinCAT 3 XTS Extension