AS2000
 

Accessories for AS2000 stepper motors

ZK4000-xxxx-xxxx | Pre-assembled cables

Ordering information Pict.
ZK4000-5100-2xxx encoder cable for ASxxxx, IP 67, PUR, (5 x 0.25 mm²), shielded, flex, M12, plug, straight, male, 5-pin, A-coded – open end
A
ZK4000-7700-0xxx motor cable, IP 67, PUR, 4 x 0.75 mm², shielded, drag-chain suitable, M12, plug, straight, socket, 4-pin, T-coded – open end
B

Max. cable length 10 m, available in lengths of 1 m, 3 m, 5 m and 10 m (xxx = length in decimetres, e.g. -2010 = 1 m)


A
ZK4000-5100-2xxx
B
ZK4000-7700-0xxx
 
Ordering information Pict.
ZK4000-5151-0xxx encoder cable for ASxxxx, IP 67, PUR, (5 x 0.25 mm²), shielded, flex, M12, plug, straight, male, 5-pin, A-coded – M12, plug, straight, male, 5-pin, A-coded
C
ZK4000-6877-0xxx motor cable, IP 67, PUR, 4 x 0.75 mm², shielded,drag chain suitable, M12, plug, straight, male, 4-pin, A-coded – M12, socket, straight, female, 4-pin, T-coded
D

Max. cable length 10 m, available in lengths of 1 m, 3 m, 5 m and 10 m (xxx = length in decimetres, e.g. -2010 = 1 m)


C
ZK4000-5151-0xxx
D
ZK4000-6877-0xxx
 

AG2250 | Gear

Ordering information
AG2250-+PLE60 Planetary gear units for servomotors and stepper motors: flange sizes F2, F3, N2
AG2250-+PLE80 Planetary gear units for AS2000: flange size N3
AG2250-+WPLE60 Angled planetary gear units for servomotors and stepper motors: flange sizes F2, F3, N2
AG2250-+WPLE80 Angled planetary gear units for AS2000: flange size N3

AG2090 | Coupling

Ordering information AG2090-+CJbb-c/d-Motorsize
AG2090-+CJ05-c/d-AS202x jaw-type coupling for flange code N2 (AS202x), available in (drive/output) 6.35/6.00 mm, 6.35/6.35 mm, 6.35/8.00 mm
AG2090-+CJ10-c/d-AS204x jaw-type coupling for flange code N3 (AS204x), available in (drive/output) 14.0/14.0 mm, 14.0/16.0 mm