AG2210
 
AG2210 Planetary gear units for Servomotors

AG2210 | Planetary gear units for Servomotors

The low-backlash, high-performance gear units of the AG2210 series offer high torques, low torsional backlash and up to 16 transmission ratios for optimised drive solutions as well as a very low running noise coupled with maximum quality.

The gear units for the AM8000/AM8500 Synchronous Servomotors are mainly used in applications where large mass inertia has to be accelerated, or where the inertia ratio between load and motor prevents dynamic motion. Gears of the AG2210 series are also suitable for use with the motor series AM3000/AM3500. The inertia ratios, i.e. the required torques and motors, can be calculated very conveniently using the CYMEX® calculation tool. In addition, there is a possibility here to check immediately whether or not the selected motor can be adapted to the gearbox.

The planetary gear units are fitted to the respective motor in the factory and delivered as a complete motor/gear unit.

 

Features

Technical data AG2210
New generation successor of AG2200, identical design
Type of gear planetary gear
Life span > 20,000 h
Coating/surface RAL7016 (grey)
Ambient temperature -15 °C…+40 °C
Lubrication lubricated for life
Installation position variable
Protection class IP 64
Options AG2210
Feather key groove according to DIN 6885 P1
Sizes 5 sizes (LP050, LP070, LP090, LP120, LP155)
Gear ratios 14 gear ratios; 1-stage with i = 3, 4, 5, 7, 10; 2-stage with i = 9, 12, 16, 20, 25, 30, 35, 40, 50, 70, 100