DeviceNet “Low Cost” Bus Coupler LC5200
left: Fieldbus LEDs
right: K-bus LEDs
 
K-bus
left: CAN-H
right: CAN-L
 
V+
Bus Coupler
supply, external
DeviceNet
Power contacts
V-
Shield
Address selector
Configuration interface

LC5200 | DeviceNet “Low Cost” Bus Coupler

DeviceNetThe LC5200 “Low Cost” Bus Coupler is marked by a smaller design and a more economical connection method. Its functions correspond to those of the BK5210 DeviceNet Bus Coupler in relation to operation with Bus Terminals and to the fieldbus properties. Up to 64 digital input/output terminals can be connected. The firmware can be updated via the configuration interface.

The LC5200 Bus Coupler is particularly suitable for use in small, low-price stations. The 24 V DC supply voltage feeds the peripheral devices via the power contacts, as well as the Bus Coupler electronics and the K-bus electronics. Electrical isolation from the I/O level is omitted from the Bus Coupler, but can if necessary be implemented by means of a power feed terminal.

The LC5200 Bus Coupler can be replaced by a Bus Coupler from the BK5210 series.

 

“Low Cost” Bus Coupler for digital signals

All the bit-oriented terminals can be connected to the “Low Cost” Bus Coupler. All the digital input and output terminals are supported with the exception of the KL15xx, KL25x2, KL2692 and KL27x1 terminals. All the system terminals, with and without diagnostics, can also be connected.

System data DeviceNet | LC5200
Number of I/O stations 64
Data transfer medium screened, twisted copper wire with power supply, 5-pin
Max. cable length
500 m 250 m 100 m
Data transfer rates
125 kbaud 250 kbaud 500 kbaud
Operating modes bit strobe, polling, cyclic, change of state (COS)
DeviceNet type communications adapter
Technical data LC5200
Number of Bus Terminals 64
Max. number of bytes fieldbus 32 byte input and 32 byte output
Bus interface connection via Bus Terminal
Power supply 24 V DC (-15 %/+20 %), through bus cable 11…25 V (conforms to DeviceNet specification)
Current supply K-bus 500 mA
Power contacts 24 V DC max./10 A max.
Electrical isolation none between power supply/fieldbus/power contacts
Connection method directly to spring-loaded terminals
Dimensions (W x H x D) similar to the Bus Terminal housing, width 21 mm
Weight approx. 100 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE, UL, Ex
Accessories  
KS2000 configuration software for extended parameterisation
Cordsets cordsets and connectors
FC5201 | FC5202 DeviceNet PCI fieldbus cards
Related products  
BK5200 DeviceNet Bus Coupler for up to 64 Bus Terminals
BK5210 DeviceNet Bus Coupler for up to 64 digital Bus Terminals
BK5220 DeviceNet “Economy plus” Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension)
BK5250 DeviceNet “Compact” Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension)
BC5250 DeviceNet “Compact” Bus Terminal Controller for up to 64 Bus Terminals (255 with K-bus extension)
BX5200 DeviceNet Bus Terminal Controller for up to 64 Bus Terminals (255 with K-bus extension)
System  
DeviceNet For further DeviceNet products please see the system overview