Mains filter terminal for dimmers KL9380
Power contact
230 V AC
Power contact 0 V
Power contact PE
Top view 
Contact assembly 

KL9380 | Mains filter terminal for dimmers

The KL9380 feed and filter terminal protects downstream Bus Terminals from high-energy and high-frequency interference pulses from the 230 V AC mains supply. The Bus Terminal contains a capacitance for smoothing the mains voltage and is particularly suitable for the operation of dimmer circuits. The KL9380 provides a sufficiently high pulse current for fast switching, which is particularly useful for operating a dimmer in leading edge phase control mode and for switching operations involving loads with capacitive effect that are not mains-synchronous. Thus, interference pulses can be filtered out.

Technical data KL9380
Nominal voltage arbitrary up to 230 V AC
Current load ≤ 10 A
Capacity approx. 1 µF
Integrated fine-wire fuse
Diagnostics
Power LED
Defect LED
Reported to K-bus
PE contact yes
Shield connection
Connection facility to additional power contact 2
K-bus, looped through yes
Bit width in the process image 0
Electrical connection to DIN rail
Current consumpt. K-bus
Electrical isolation
Housing width in mm 12
Weight approx. 50 g
Side by side mounting on Bus Terminals with power contact yes
Side by side mounting on Bus Terminals without power contact
Operating/storage temperature 0…+55 °C/-25…+85 °C
Approvals CE
Related products  
KL2751 1-channel universal dimmer terminal 230 V AC, 300 VA (W)
KL2761 1-channel universal dimmer terminal 230 V AC, 600 VA (W)