Adapter terminal for TeSys model U KL8610
24 V DC
0 V
Signal output
Top view

KL8610 | Adapter terminal for TeSys model U

The KL8610 adapter terminal enables the connection of the TeSys Model U motor starter to the Beckhoff Bus Terminal system. Together with the KL8601 communication module, the KL8610 forms an operational unit in the TeSys motor starter. The KL8610 adapter terminal is attached to the end of the bus terminal block in the same way as the standard terminal KL9010. The block is terminated with the KL8610 and offers the option to connect up to eight TeSys Model U motor starters. In the KL8610, the K-bus signals are converted to a system bus and fed into the RJ 45 plug connector with 24 V DC. This supply is short-circuit-proof and capable of carrying up to 2 A. No further parameterising or configuration work on the KL8610 is necessary apart from plugging-in the K-bus extension cable.

Technical data KL8610
Connection up to 8 TeSys model U KL8601
Type of connection RJ 45 socket
Voltage 24 V DC (-15 %/+20 %)
Current load max. 2 A short-circuit-proof
Current consumpt. K-bus typ. 32 mA
Electrical isolation 500 V (power contact/supply voltage/K-bus)
Bit width in the process image 3 bytes input and 3 bytes output per each TeSys modul (KL8601)
Weight approx. 65 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE
Accessories  
ZK1090-0101-1002 K-bus extension cable, assembled at both ends with RJ 45 plug, double-shielded, red, length 0,2 m
ZK1090-0101-1005 K-bus extension cable, assembled at both ends with RJ 45 plug, double-shielded, red, length 0,5 m
KL8601 Communication module for Schneider motor starter TeSys model U