4-channel analog output terminal -10…+10 V KL4434
Run LED4
Run LED2
Run LED3 
Run LED1 
Power contact
+24 V
Power contact 0 V
Output 1
0 V
Output 3
0 V
Output 2
0 V
Output 4
0 V
Top view 
Contact assembly 
extended shock and vibration range

KL4434 | 4-channel analog output terminal -10…+10 V

The KL4434 analog output terminal generates signals in the range between -10 to +10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. In the KL4434, the four outputs are 2-wire versions.

The Bus Terminal has a common ground potential. The power contacts are connected through. The reference ground of the outputs is the 0 V power contact. The LEDs indicate the data exchange with the Bus Coupler.

Technical data KL4434 | KS4434
Technology single-ended
Number of outputs 4
Signal voltage -10…+10 V
Load > 5 kΩ (short-circuit-proof)
Output error < ±0.1 % (relative to end value)
Resolution 12 bit
Conversion time ~ 4 ms
Electrical isolation 500 V (K-bus/signal voltage)
Current consumption power contacts only load
Current consumption K-bus typ. 20 mA
Bit width in the process image output: 4 x 16 bit data (4 x 8 bit control/status optional)
Configuration no address or configuration setting
Weight approx. 75 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE, UL, Ex, GL