2-channel analog output terminal 0…10 V KL4002
Run LED1
Run LED2
+Output 1
Ground
Shield
+Output 2
Ground
Shield
Top view 
Contact assembly 
extended temperature range
extended shock and vibration range

KL4002 | 2-channel analog output terminal 0…10 V

The KL4002 analog output terminal generates signals in the range from 0 to 10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels of the Bus Terminal have a common ground potential. The KL4002 combines two channels in one housing. The run LEDs give an indication of the data exchange with the Bus Coupler.

Technical data KL4002 | KS4002
Technology single-ended
Number of outputs 2
Power supply via the K-bus
Signal voltage 0…10 V
Load > 5 kΩ (short-circuit-proof)
Output error < ±0.1 % (relative to end value)
Resolution 12 bit
Conversion time ~ 1.5 ms
Electrical isolation 500 V (K-bus/signal voltage)
Current consumption power contacts – (no power contacts)
Current consumption K-bus typ. 75 mA
Bit width in the process image output: 2 x 16 bit data (2 x 8 bit control/status optional)
Configuration no address or configuration setting
Weight approx. 85 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE, UL, Ex
Special terminals
KL4002-0010 Siemens S5 format
KL4002-0011 fast µP, scan time approx. 0.15 ms
KL4002-0050 Siemens S7 format