1-channel analog output terminal 0…10 V KL4001
Run LED1
+Output 1
Ground
Shield
Ground
Shield
Top view 
Contact assembly 
extended temperature range
extended shock and vibration range

KL4001 | 1-channel analog output terminal 0…10 V

The KL4001 analog output terminal generates signals in the range from 0 to 10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels of the Bus Terminal have a common ground potential. The KL4001 is particularly suitable for signals with electrically isolated ground potentials. The run LEDs give an indication of the data exchange with the Bus Coupler.

Technical data KL4001 | KS4001
Number of outputs 1
Power supply via the K-bus
Signal voltage 0…10 V
Load > 5 kΩ (short-circuit-proof)
Output error < ±0.1 % (relative to end value)
Resolution 12 bit
Conversion time ~ 1.5 ms
Electrical isolation 500 V (K-bus/signal voltage)
Current consumption power contacts – (no power contacts)
Current consumption K-bus typ. 75 mA
Bit width in the process image output: 1 x 16 bit data (1 x 8 bit control/status optional)
Configuration no address or configuration setting
Special features potential-free output
Weight approx. 85 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE, UL, Ex