2-channel digital input terminal 24 V DC, type 3 KL1402
Signal LED 2
Signal LED 1 
Power contact
+24 V
Power contact 0 V
Power contact PE
Input 1
Input 2
+24 V
0 V
PE
Top view 
Contact assembly 
extended shock and vibration range

KL1402 | 2-channel digital input terminal 24 V DC, type 3

The KL1402 complements the proven KL1404, KL1414, KL1408 and KL1418 digital input terminals with their type 3 specification. The current/voltage characteristics have been optimised for 2-wire sensors. The input current in low state is increased to a minimum value of 1.5 mA and therefore supports the majority of commercially available 2-wire sensors. A typical value for the energy-saving high current is 2.2 mA. The input complies with the EN 61131-2 type 3 standard and is compatible with type 1.

Technical data KL1402 | KS1402
Connection technology 4-wire
Specification EN 61131-2, type 1/3
Number of inputs 2
Nominal voltage 24 V DC (-15 %/+20 %)
“0“ signal voltage -3…+5 V (EN 61131-2, type 1/3)
“1“ signal voltage 11…30 V (EN 61131-2, type 3)
“0“ signal current 0…1.5 mA
“1“ signal current 2.0…2.5 mA
Input filter typ. 3.0 ms
Current consumption K-bus typ. 3 mA
Current consumption power contacts typ. 1 mA + load
Electrical isolation 500 V (K-bus/field potential)
Bit width in the process image 2 inputs
Configuration no address or configuration setting
Weight approx. 50 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE, UL, Ex, GL